EasyManuals Logo

Logik L5DABIP13E User Manual

Logik L5DABIP13E
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
GB
17
Maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Problem Cause / Solution
No Sound Adjust the volume control, it may not be turned up.
Static Sound Signal reception is too low. Adjust the aerial or move the unit to
a stronger signal location.
Sound is distorted Volume is too high. Adjust the volume control.
Desired station not found Weak signal. Use the Manual Tune function.
The display shows “Not
available
No DAB coverage in your area.
Poor reception. Adjust the position of the aerial.
The display is blank This may occur if the broadcaster changes the label of a service
or removes a label while tuned. The unit will try to retune or
perform a scan.
Alarm didn’t sound Check the alarm is set, the alarm icon will be displayed when it
is set.
Adjust the alarm volume it may be set too low.
Specications
Model L5DABIP13E
Mains Adapter Input AC 100-240V ~50/60 Hz, 2000mA
Power Output 2W RMS
Radio Frequency FM 87.5 – 108 MHz
DAB 174.928 – 239.200 MHz
Net Weight 2.85kg
Features and specifications are subject to change without prior notice.
L5DABiP13E_IB_121010_Michelle.indb 17 10/10/2012 10:39 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L5DABIP13E and is the answer not in the manual?

Logik L5DABIP13E Specifications

General IconGeneral
BrandLogik
ModelL5DABIP13E
CategoryRadio
LanguageEnglish

Related product manuals