41 | EN
8. GENERAL WORKING PRINCIPLE
Mechanical control circuit used in the mechanical clock-controlled oven (Module) control of
the oven function, showing the mechanical formats, such as furnace uptime, choose food
from the cooking guide, cooking demonstration of recipes, automatic cooking made from
the cooking guide, showing the cooking time, the timer (set the time counting backwards ,
making a sound when time runs out) and gives the internal temperature of the oven control
facilities.
The furnace consists of the following combined and features.
- Depending on the temperature inside the oven (120 ° C ± 20 ° C (1st stage), 300 ° C ± 20
° C (2nd level there are only pyro oven), between the cooling fan control.
- The internal temperature of the furnace can be adjusted between 40 ° C to 280 ° C (± 5 °
C accuracy, ± 10 ° C accuracy from 250-280C)
- Tim (warning time) can be set between 23 hours and 59 minutes to 1 minute.
- The cooking time can be set from 1 minute to 5 hours and 59 minutes.
-Select the endofthecooking time memories
-1100 / 2200WHealth grill resistance
-1800Whealthturbo resistance
-Healthupperovenheating 1100W
-Lower ovenheating1200W health
-22Wness Fan Motor
-The rotisserie function feature (works on the grill function.) (Optional)
Although .Fır any wrong operation is protected by a bi-metal type thermal breaker. Pyro
ovens Bi-metal type in an external furnace is on the left rear upper side of the chassis and
the operating temperature of the thermal breaker oven to 250 ° C. When he came inside the
furnace to a temperature of 350-400 ° C is separated from the phase conductor feeding **.
* Look Out !!!!! The furnace consists of a situation gone wrong on the furnace when thermal
cutting horse. (Such as the operation of the oven temperature sensor) should resolve the
situation bulunarak error before forming replaced.
The cooling fan is connected to the temperature inside the oven (120 ° C ± 20 ° C (1st
stage), 300 ° C ± 20 ° C (2nd level there are only pyro oven), between engaged and ground
inside until it fell to about 160 ° C continues to work. a time to throw heat on the cooling
engine is turned off, even after baking oven control circuit will continue to further study.
To Next Page
Loading...
