53 | EN
13.COMPONENT ASSEMBLY / DİSASSEMBLY
NOTE: The following components disassembly operations are related below. For
component installations apply this operations in reverse order.
13.1 Replacement of the knob
Pull knob to yourself to remove. Push the new knob against the control panel. Rounded
sufoces on the knobs shaft and commutators shaft must overlap.
13.2 Replacement of the upper cover sheet
Unscrew 10 screws placed on the upper cover sheet. Pull the tree sheet to wards the rear ot
the oven and lift to remove.
To Next Page
Loading...
