11
4. When the time is set, the timer will begin to count down
immediately.
The display will show the remaining time and the timer
indicator will flash for 5 seconds.
3. Touch the and controls together to cancel the
timer. – – will show in the minute display.
The red dot next to the power level indicator
will illuminate indicating that zone is selected.
5. When the set time has elapsed, the corresponding cooking
zone will switch off automatically.
• Other cooking zones will keep operating if
they are turned on.
• If you want to change the time after the timer
is set, you have to start from step 1.
2. While the power level indicator is flashing, set the time by
touching the or controls of the timer.
• Touch the or controls of the timer
once to increase or decrease by 1 minute.
• Touch and hold the or controls of the
timer to increase or decrease by 10 minutes.
• If the setting time exceeds 99 minutes, the
timer will automatically return to – –.
LCHOBTC10_IB_110506.indd 11 5/6/11 1:48 PM
To Next Page
Loading...
