Logik LCHOBTC10 - Over-Temperature Protection; Residual Heat Warning; Auto Shutdown; Using the Timer

9
Using the Timer as a Minute Minder
1. Make sure the ceramic hob is turned ON.
Over-Temperature Protection
A temperature sensor monitors the temperature inside the ceramic hob.
When an excessive temperature is monitored, the ceramic hob will stop operation automatically.
Residual Heat Warning
When the hob has been operating for some time,there will be some residual heat. The letter “ ”appears to warn
you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you forget to switch off
a cooking zone. The default shutdown times are shown in the table below:
Power Level 1 2 3 4 5 6 7 8 9
Default Working Timer (Hour) 8 8 8 4 4 4 2 2 2
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when
the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer for up to 99 minutes.
Timer Overview
Minute display
shows the number of minutes set/
remaining for:
• the cooking zone whose indicator
dot is ashing
You can use the minute minder even if you’re
not using any cooking zones.
LCHOBTC10_IB_110506.indd 9 5/6/11 1:47 PM