3. Do not connect the unit to the mains socket before
installation. Ensure you are not installing the unit
right in front of the mains socket. This is to avoid
potential damage to the back of the unit.
After installing the appliance, ensure that the mains
plug is easily accessible.
4. Position the unit next to a water tap and a drain.
Level the unit if needed.
5. Ensure the water inlet and drain hoses are not
kinked or squashed. The unit must not stand on the
mains cable.
up down
level
The electrical connection conditions must
correspond with the specications on the
rating plate of the dishwasher. Do not use
extension cables.
To Next Page
Loading...
