9
1. Please ensure the dishwasher is installed by a
qualied technician. Refer to the tools required.
Location
When selecting a position for your dishwasher you should make sure the installation surface is at and rm,
and the room is well ventilated. Avoid locating your dishwasher near a heat source, e.g. cooker, boiler or
radiator. Extreme cold ambient temperatures may also cause the appliance to not perform properly. This
dishwasher is not designed for use in a garage or outdoor installation.
Do not drape the dishwasher with any covering. When installing, ensure that free space is left at the sides.
2. Ensure there is clearance each side of the unit to
allow slight sideways movement for servicing when
required.
The dimension of the dishwasher is 550(W) x 500(D)
X 438(H) in mm. The gure outlines the minimum
dimensions required to accommodate the table top
dishwasher. Protect plastic parts and cables from
high temperatures.
550mm
438mm
500mm
50mm
or
more
150mm or more
50mm or more
150mm or more
unit in mm
Installation
All parts removed must be saved to do the reinstallation in the future. Ensure the dishwasher is
unplugged and empty. We recommend that 2 people handle the dishwasher during installation.
3. Do not connect the unit to the mains socket before
installation. Ensure you are not installing the unit
right in front of the mains socket. This is to avoid
potential damage to the back of the unit.
After installing the appliance, ensure that the mains
plug is easily accessible.
The electrical connection conditions must
correspond with the specications on the
rating plate of the dishwasher. Do not use
extension cables.
LDWTT20N_IB_5L_RC_Final221111.indb 9LDWTT20N_IB_5L_RC_Final221111.indb 9 11/11/2022 3:43 PM11/11/2022 3:43 PM
To Next Page
