11
7. Connect the drain hose. The drain hose can be
placed into your sink, or connected to the waste
pipe.
8. After connecting the hoses, check all connections
for leaks.
max.
10cm
Before connecting to the waste pipe, make
sure to check the waste pipe and remove any
stopper or blockage inside, otherwise the
unit may not be able to expel the waste water
properly.
• The waste pipe must only be connected to
the foul drains and not the surface water
drainage system.
• Do not lift the drain hose higher than 10
cm from the table top, otherwise the unit
may not be able to expel the waste water
properly.
• Do not bend your drain hose.
• Please close the hydrant after using.
LDWTT20N_IB_5L_RC_Final221111.indb 11LDWTT20N_IB_5L_RC_Final221111.indb 11 11/11/2022 3:43 PM11/11/2022 3:43 PM
To Next Page
