8
1. Remove the 4 scews from top cover.
2. Lift the top cover away from the fridge.
3. Remove the three screws, then remove the
upper hinge that holds the door in place. Lift the
upper door and place it on a padded surface to
prevent it from scratching.
4. Take o the middle hinge by removing the
screws. Lift the lower door and place it on a
padded surface to prevent it from scratching.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To take the door o it is necessary to tilt the unit backwards. You should rest the unit on
something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit at as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a qualied
technician. You should only try to reverse the door yourself if you believe that you are qualied to
do so.
LFC152W14_IB_Final140122.indd 8 22/01/2014 9:15 PM
To Next Page
Loading...
