Logik LIR60W22 - Reversing the Door Swing

8
INSTALLATION
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Spanner
1. Remove the screw hole covers from the left side and the door hinges from the right side.
Remove the door and place it on a padded surface to avoid scratch. Be careful of the door
hinges.
• Ensure the unit is unplugged and empty.
• To take the door o it is necessary to tilt the unit backwards. You should rest the
unit on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit at as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualied technician. You should only try to reverse the door yourself if you believe
that you are qualied to do so.
LIR60W22_IB_220525.indd 8LIR60W22_IB_220525.indd 8 25/5/2022 4:36 PM25/5/2022 4:36 PM