19
Squeezebox™ Owner’s Guide
Squeezebox Wireless has both 802.11g and ethernet connections. You can easily
connect non-wireless devices (such as a TiVo, PlayStation, XBox, or a home theatre PC) to
your wireless network. To set up Squeezebox as a wireless bridge:
1. Plug the device that you want to connect to your wireless network into the
ethernet port on the back of Squeezebox using an ethernet crossover cable. You
can purchase a crossover cable at most retail computer stores.
2. Press and hold the arrow on the remote for five seconds to enter the
Squeezebox setup screens.
3. Press to scroll to the selection and press .
4. Go through the network setup screens, choosing to connect to a wireless
network and then select your region.
5. You should be presented with the option to turn on wireless bridging. Select
and then press .
6. Continue pressing to finish setting up your wireless connection. At the
end, your Squeezebox will be acting as a wireless bridge.
Squeezebox can crossfade between songs. You can change the type of crossfade or turn
it off completely.
1. From the web interface, click .
2. From the menu at the top, click .
3. In the Transition section, choose the type of transition you want from the drop
down list and click . Choose from:
• Crossfading between the two songs
• Fading in at the beginning of a song
• Fading out at the end of a song
• Fading out and in at song transitions
• No fading at all
To Next Page
Loading...
Need help?
General
