Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 27
Do not use the lift support as an optional accessory to replace side
rails (risk of crushing and -falling).
Do not attach anything to the lift support.
When setting the lift support to the fastening sleeve, make sure that
the lift support is locked in place and does not rotate.
Check the lift support frame fastening and functionality regularly.
Make sure that the space surrounding the bed is safe. There must be
enough space around the bed – including above it. There must be no
sharp corners or potentially hazardous objects around the bed. When
the bed is raised, the lift support also raises, increasing the space
required for the bed.
Image 35. Lift support components
The lift support includes components illustrated in image 35:
1. Support frame
2. Mounting plate
3. Finger screws
4. Handle
To Next Page
Loading...
