Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 49
12.2 Electromagnetic radiation
Guidance and manufacturers’ declaration
This product is intended for use in electromagnetic environments that are
specified below. The user should ensure that the product is used in an
appropriate environment.
Emission
test
Compliance Electromagnetic environment -guidance
RF
emissions
CISPR 11
Group I
This device uses radio frequency energy only for its internal functions.
Due to this, the amount of RF radiation is very low, and interference
caused to nearby electronic devices is unlikely.
RF
emissions
CISPR 11
Class B
This device is suitable for use in all facilities, including home care and
facilities that are connected to a public electrical network through which
230VAC voltage is available.
Harmonic
emissions
IEC 61000-
3-2
Class A
Voltage
fluctuations/
flicker
emissions
IEC 61000-
3-3
Complies
Table 2. Electromagnetic operating environment
To Next Page
Loading...
