Need help?Do you have a question about the Lombardini 3LD 510/S and is the answer not in the manual?
Specifies the correct engine oil types and specifications.
Procedures for measuring cylinder and piston wear and dimensions.
Details on checking and assembling the engine's oil pump.
Procedure for checking engine oil pressure after assembly.
Components and assembly of the injection pump.
Procedure for static adjustment of the injection timing.
How to set the engine's idle speed.
How to set the engine's maximum idle speed.
Procedure for adjusting the injection pump's fuel delivery.
Procedure for adjusting injection pump delivery using a dynamometer.
Specifies the correct engine oil types and specifications.
Procedures for measuring cylinder and piston wear and dimensions.
Details on checking and assembling the engine's oil pump.
Procedure for checking engine oil pressure after assembly.
Components and assembly of the injection pump.
Procedure for static adjustment of the injection timing.
How to set the engine's idle speed.
How to set the engine's maximum idle speed.
Procedure for adjusting the injection pump's fuel delivery.
Procedure for adjusting injection pump delivery using a dynamometer.
General| Bore | 85 mm |
|---|---|
| Stroke | 90 mm |
| Combustion System | Direct injection |
| Fuel | Diesel |
| Lubrication System | Forced lubrication with gear pump |
| Governor Type | Mechanical |
| Engine Type | 4-stroke diesel |
| Displacement | 0.510 L (510 cm³) |
| Maximum Power | 8.7 kW |
| Cooling System | Air-cooled |
| Starting System | Electric starter |
To Next Page