What to do if Lombardini 9 LD 626-2 NR does not start?
If your Lombardini Engine doesn't start, the issue might be in the fuel circuit. Possible causes include an obstructed fuel line, a clogged fuel filter, air or water leaks in the fuel system, a clogged tank cap vent hole, no fuel in the tank, a faulty fuel feeding pump, or a sticking extra fuel control level. Check these components to identify and resolve the starting problem.
General| Number of Cylinders | 2 |
|---|---|
| Fuel System | Direct injection |
| Compression Ratio | 18:1 |
| Lubrication System | Forced lubrication with gear pump |
| Governor Type | Mechanical |
| Engine Type | Diesel |
| Displacement | 1248 cc |
| Cooling System | Air |
| Max Power | 19.8 kW (26.9 hp) at 3000 rpm |
| Starting System | Electric |
Identifies and explains important safety symbols and their meanings.
Outlines essential rules for safe engine operation and maintenance procedures.
Details crucial safety procedures to be followed while the engine is in operation.
Information on lubricant classification, viscosity, and international specifications.
Specific oil types and grades recommended for the engine.
Procedures for checking oil pressure and the oil pressure relief valve.
Details on injection pump components, assembly, and testing.
Procedures for setting and adjusting the static injection timing.
Information on different injector types, nozzles, and setting procedures.
Procedures for setting the engine's idling and full load speeds.
Adjusting the injection pump's fuel delivery for optimal performance.
Recommended tightening torques for major engine components.
Tightening torques for standard screws based on size and resistance class.
To Next Page