107
wheel.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts in a crisscross pat-
tern to the specified torque.
Do not reverse the rims on the vehicle to
widen the track width. Installing wheels im-
properly increases the risk of wheel failure
and accidents.
Battery
The battery is located under the hood. This
model is equipped with a VRLA (Valve Regulat-
ed Lead Acid) battery. There is no need to
check the electrolyte or to add distilled water.
However, the battery lead connections need to
be checked and, if necessary, tightened.
Wheel nut torque:
Front: 55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf)
To Next Page
Loading...
Need help?
General
