49
If the light does not come on, ask a
BMS dealer to inspect the reverse in-
dicator light electrical circuit.
4. Release the parking brake.
5. Check behind the vehicle for people or ob-
stacles, and then release the brake pedal.
6. Press the accelerator pedal gradually and
continue to watch to the rear while back-
ing.
On-Command four-wheel-drive switch and
differential gear lock switch
You may notice that the vehicle handles differ-
ently in “2WD”, “4WD”, and “LOCK”. For ex-
ample, you should expect that the vehicle will
require more effort to turn in “LOCK”. Al- ways
stop the vehicle before changing between
“2WD” and “4WD” or “4WD” and “LOCK”.
“2WD”/“4WD”
To change from “2WD” to “4WD”, stop the ve-
hicle, and then set the switch to “4WD”. When
the vehicle is in four-wheel drive, the four-
wheel-drive indicator “ ” will come on in the
multi-function display. To change from “4WD”
to “2WD”, stop the vehicle, and then set the
switch to “2WD”.
To Next Page
Loading...