112
4. Turn the key to “ON” and turn on the elec-
trical circuit in question to check if the de-
vice operates. If the fuse blows again im-
mediately, have a BMS dealer check the
electrical system.
5. Close the hood.
Replacing a headlight bulb
If a headlight bulb burns out, replace it as fol-
lows.
1. Open the hood.
2. Remove the cover at the rear of the head-
light by pulling it off.
3. Remove the headlight bulb holder by
pushing it in and turning it counterclock-
wise.
4. Wait for the headlight bulb to cool before
touching or removing it. Remove the bulb
by pulling it out.
To Next Page