23
Light switch
1.Head light switch
2.High/low beam switch
Turning the head light switch to the
“ ”position causes the following lamps
to light simultaneously.
1. Taillights
2. Lamp built in the whole switch
3. Lamp built in the instrument
4. Lamp built in the bumper
5. Front left and right position lights
The high/low beam switch is only opera-
tive when the head light is in the “ ”posi-
tion.
1. Set the witch to“ ” to open the
dipped headlight and taillight
2. Set the witch to “ ” to open the
high beam headlight and taillight
Set the head light witch to “ ” to turn off
all the lights
Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter motor will not operate properly. If this
should happen, remove the battery and re-
charge it.
To Next Page
Loading...
Need help?
General
