20
Coolant temperature warning light
“ ”
If the coolant temperature reaches a specific
level, this light comes on to warn that the
coolant temperature is too hot. If the light
comes on during operation, stop the engine as
soon as it is safe to do so and allow the engine
to cool down for about 10 minutes. (See Chap-
ter 8.)
The electrical circuit of the warning light can be
checked by turning the key to “ON”. If the
warning light does not come on initially when
the key is turned to “ON”, or if the warning light
remains on, have a BMS dealer check the elec-
trical circuit.
The engine may overheat if the vehicle
is overloaded. If this happens, reduce
the load to specification.
After restarting, make sure that the
warning light is out. Continuous use
while this warning light is on may cause
damage to the engine.
To Next Page
Loading...
Need help?
General
