Long Range Systems T7400 - Pager Settings and Alerts

Auto ON/OFF
1
. Using the Up (or Dn) scroll button scroll until display shows “Auto ON/OFF”
2
. Press Read/Select to set auto on/off
3
. Use the Up (or Dn) scroll button to select On or Off
4. Press Up (or Dn) scroll button to set on/off time and press Read/Select to move through the seg-
m
ents
Set Key Tone On/Off
1. Using the Up (or Dn) scroll button scroll until display shows “Set Key Tone”
2. Press Read/Select to set key tone on/off
3. Use the Up (or Dn) scroll button to select On or Off
4. Press Read/Select to set
Select Alert Mode
1. Using the Up (or Dn) scroll button scroll until display shows “Set Alert Mode”
2. Use the Up (or Dn) scroll button to select Beep, Vibe, or Both
3. Press Read/Select to set:
Beep - Use the Up (or Dn) scroll button to select:
• Select Beep Type - Loud or Soft and press Read/Select to set
• Set Alert Time (seconds) and press Read/Select to set
Vibe - Use the Up (or Dn) scroll button to select:
• Set Vibe Strentgh - Strong or Weak and press Read/Select to set
• Set Vibe Pulse - Cnst, P1, P2 or P3 and press Read/Select to set
• Set Alert Time (seconds) and press Read/Select to set
Both - Use the Up (or Dn) scroll button to select:
• Set Vibe Strentgh - Strong or Weak and press Read/Select to set
• Set Alert Time (seconds) and press Read/Select to set
Stopwatch Function
1. Using the Up (or Dn) scroll button scroll until display shows “Stop watch”
2. Press Read/Select
• Press Scroll UP to start or stop timer
• Press Read/Select to clear the timer
• Press Scroll DN to exit stopwatch
Battery
The RX-E 4-Line Alpha pager uses 1 AAA Battery.
Programming
To program the pager see pg. 24
Long Range Systems 35 T7400 User Manual