Long Range Systems T7400 - Using the Alpha Coaster Guest Pagers; Programming; Charging

The pagers all use different chargers:
• Coasters use the Charger 8 (CH-R8)
• AdverTeasers and Star Pagers use the Charger 9 (CH-R9)
• Lobster Pagers use the Lobster Charger (CH-LP)
• Pizza Pagers use the Pizza Charger (CH-PZ)
Using the Alpha Coaster Guest Pagers
Programming
To program the Alpha Guest Pagers, refer to page 26.
Charging
Any Alpha Coaster pager will require use of an LRS coaster charger.
1. Place the pager in the charger. 15 pagers at a time on a Charger.
2. Allow unit to charge fully overnight.
3. Remove from charger, and pager will vibrate, beep, and light all lights as a verification that it is
working
4. Replace the pager in the charger at the end of each day.
• The Alpha Coasters use the Charger 8 (CH-R8)
Long Range Systems 39 T7400 User Manual