Long Range Systems T7400 - Using the Star Pager; Charging; Programming

Using the Star Pager
Charging
Any rechargeable pager will require use of an LRS charger.
1. Place the pager in the charger.
2. Allow unit to fully charge overnight.
3. Remove from charger, and pager will vibrate and light all lights as a verification that it is working.
4. Replace the pager in the charger at the end of each day.
• Star Pagers usese the charger 9 (CH-R9)
Programming
To program the Staff Star Pager, see page 27.
Using the SP5 1-Line Rechargeable Alpha Numeric Pager
Charging
The SP5 uses the Charger 5 (CH-R5)
1. Place the pager in the charger
2. Allow unit to fully charge overnight
3. Remove from charger, pager will vibrate or beep to show it is working
4. LCD will show the pager’s ID
5. Replace the pager in the charger at the end of each day
Long Range Systems 36 T7400 User Manual
1
2
3
4
8
00
.
4
3
7.
4
9
9
6
w
w
w
.
p
a
g
e
r
.
n
e
t
1
4
www.pager.net