EasyManua.ls Logo

Long Range Systems T9560 EZ - Transmitter Status and Maintenance; Low Battery Alert Indicator; Factory Reset Procedure; Pager Cleaning Guidelines

Long Range Systems T9560 EZ
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Long Range Systems 7 T9560 EZ User Manual
Low Battery Alert
When the transmitter’s battery is low, the LCD will display “LoBat”.
Factory Reset
To reset the transmitter factory defaults, press PROG 0 0 0 Enter
Cleaning & Charging Instructions For LRS Paging Equipment
Cleaning:
LRS pagers are made from industrial-strength, polycarbonate material.
However, this material is susceptible to hairline cracking if non-approved
cleaners are used. When cleaning LRS pagers, we recommend only
using ISOPROPYL ALCOHOL-BASED CLEANERS.
To clean the equipment:
1. Take a clean rag and an isopropyl-alcohol based cleaner
2. Soak the clean rag with the isopropyl alcohol cleaner
3. Wipe down the pagers or equipment.
Cleaning equipment with any other non-approved cleaners can weaken
plastic and cause hairline cracks. Pagers and equipment that are
cleaned with unapproved cleaners and suffer cracking will not be cov-
ered under warranty.
Do not submerge any LRS paging equipment in any type of liquid as
this will also damage the equipment and is not covered under the stan-
dard warranty.

Related product manuals