Long Range Systems 8 T9560 EZ User Manual
Charging:
Place rechargeable pagers on the charger and let them charge for 8
hours prior to first use.
Rechargeable pagers should be kept on charge even during extremely
long periods of inactivity.
Should you have any questions, please contact the LRS Customer
Service Department at 800.437.4996.
Troubleshooting
Transmitter Unit
Transmitter Display does not light when a key is pressed
• The proper power supply for this transmitter is 12VDC 4.0A
• Ensuring that the proper power supply is in use, plug the
T9560 into that power supply and allow it to charge for 30 minutes
• If the unit still is blank and has no power, substitute the power
supply being used with the power supply used for the pager
charging base (this is meant as a test only and not as a
permanent replacement)
• If substituting with another power supply results in a T9560
that is working properly, please call LRS to purchase a new
power supply for the T9560
Transmitter Display is okay, but the pager does not receive the page
Check whether this affects all pagers or just one pager
If only
one pager
is affected:
• Ensure that the pager is properly charged and initiates a
vibrate/flash sequence when removed from the charging base
• If the pager does not vibrate and flash when removed
from the charging base, please charge it overnight
before troubleshooting further
• If the pager initiates the vibrate/flash sequence when
removed from the charging base, please continue with
To Next Page
Loading...