SETUP
&
USE
Page 3 V 2.0
2. Turn the mounting knob clockwise to tighten the camera onto
your eyepiece. As you tighten the mount, it will self center the
camera on the eyepiece.
MOUNTING
Toproperly mount your camera to your spotting scope:
1. Slide the camera's universal mounting assembly over the eyepiece
of your scope until the camera makes contact with the rear of the
eyepiece. The camera has a spacer built in to account for most eye
relief setups; however, the camera may need to be setup a little
further off the eyepiece depending on your particular scope.
Mounting Knob
to tighten
to loosen
To Next Page
Loading...