Look 675 - LOOK HSC 675 Fork; LOOK Head Fit 4 Integrated Headset; Headset Features and Benefits

EN
LOOK HEAD FIT 4 INTEGRATED HEADSET
Specific feature of the headset:
The new LOOK Head Fit 4 headset is a patented system offering several improvements.
It makes it possible to dissociate the adjustment of the headset from the adjustment of the
stem. These two functions become independent of each other, which allows for simpler
adjustment of the stem and better precision of the adjustment of the headset.
Moreover, this increases the working life of the bearings of the headset when substantial
force is applied to the handlebar.
DESCRIPTION OF THE HEADSET:
LOWER PART:

diameter 52 mm.
UPPER PART:

diameter 41 mm.




Rubber spacer
Pin and plugs
Threaded insert
Compression cone
Upper bearing ring
Stem cap
Stem
Compression kit
Tightening nut

Lower bearing
ring
Fork
Fig. b
18 19
LOOK HSC 675 FORK
Fig. a

Diam 1’’1/2
EN
Cutting line
The LOOK forks comprise a conical roller bearing surface, designed to receive it directly, the-
reby eliminating the need for a traditional fork cone.
They conform to the EN 14 781 standard.