To Next PageTo Next Page
Need help?Do you have a question about the Lopi Northfield GS and is the answer not in the manual?
General| Heating Capacity | Up to 2, 000 sq ft |
|---|---|
| EPA Certified | Yes |
| Blower Included | Optional |
| Material | Steel |
| Burner Type | Dancing-Fyre® Burner |
| Log Length | 18 inch |
| Depth | 21.5" |
Immediate actions to take in case of a gas leak.
Requirements for qualified installation, fuel type, and safe operation.
Guidelines on storing flammables, dealing with uncertainty, and water damage.
Rules for placing the heater, firebox contents, and flammable items.
Critical warnings about installation procedures and potential dangers.
Required minimum distances from combustibles.
Steps to convert the vent from top to rear configuration.
Further steps for the top to rear vent modification.
Guidelines for selecting a safe and appropriate location for the heater.
Necessary floor protection based on flooring type.
Specifics for connecting the stove to an electrical outlet.
Procedures for safely connecting the gas supply line.
Requirements for gas pressure to ensure proper operation.
General rules for venting the appliance safely.
Procedures for connecting vent sections.
Introduction to components controlling air and gas flow.
How to adjust the intake restrictor for optimal performance.
How to adjust the exhaust restrictor for venting.
Details for venting horizontally without vertical rise.
Details for venting horizontally with a minimum vertical rise.
Details for venting vertically from the rear.
Venting into a fireplace using a co-linear adapter.
Details for venting vertically from the top.
Details for venting horizontally from the top.
Critical clearances and rules for vent terminal placement.
Using a conversion kit for existing Class A chimneys.
Instructions for converting to interior masonry chimneys.
Adjusting air shutters for optimal flame appearance.
Important initial steps and warnings before operating the stove.
Initial firing and curing process for new stoves.
Switching between continuous and intermittent pilot modes.
Recommended annual inspection and maintenance tasks.
Common causes and solutions for burner ignition failure.
Diagnosing issues with heat distribution from the stove.
Details and warnings found on the appliance's safety label.
Critical clearance requirements for safe installation.
Steps to convert the appliance from natural gas to propane.
Components and overview for installing the remote control system.
