Do you have a question about the Lopi Deerfield and is the answer not in the manual?
Recommends installing smoke and CO detectors for enhanced home safety.
Crucial initial warnings and steps before commencing installation.
Guidance on selecting the optimal location and layout for the stove.
Specifies safe positioning requirements relative to combustibles.
Details the need for non-combustible floor protection under the stove.
Covers proper grounding, polarity, and outlet connections.
Defines minimum distances to walls and ceilings for safe operation.
General rules and restrictions for installing the exhaust venting system.
Specifies limits on vent length and height for optimal draft.
Defines the required diameter and type of venting material.
Procedures for connecting, sealing, and securing vent sections.
Requirements for the vent's exterior exit point, including caps and clearances.
Specific installation rules for mobile homes, including air intake and anchoring.
Explains the benefits and installation of outside combustion air.
Specifies dimensions and clearances for alcove installations.
Critical safety warnings and precautions for operating the heater.
Step-by-step guide for safely filling the pellet hopper.
Procedures for initial startup, including paint curing and exhaust blower run.
Guide to operating the stove in Simple Mode, including temperature and heat output adjustment.
Operating the stove in Manual or Thermostat modes.
Steps for starting, stopping, and adjusting heat output manually.
Using the internal or external thermostat to control room temperature.
Safety precautions and operational behavior during power interruptions.
Overview of maintenance procedures and recommendations for professional service.
Outlines recommended weekly, monthly, and yearly maintenance tasks.
How to inspect flame quality and identify clinkers.