EasyManua.ls Logo

Lopi Spirit User Manual

Lopi Spirit
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
- July, 1994 -
WARNING: If the information in this manual is not followed exactly, a fire or explosion may
result causing property damage, personal injury or loss of life.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
¥ Do not try to light any appliance.
¥ Do not touch any electrical switch; do not use any phone in your building.
¥ Immediately call gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
¥ If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Spirit
-
Gas Stove Room Heater
10850 117th Place N.E. Kirkland, WA 98033
OMNI
Listed
Question and Answer IconNeed help?

Do you have a question about the Lopi Spirit and is the answer not in the manual?

Lopi Spirit Specifications

General IconGeneral
BrandLopi
ModelSpirit
CategoryStove
LanguageEnglish

Summary

General Information and Safety

Safety Warnings

Critical safety warnings regarding fire or explosion if manual is not followed.

Stove Installation

Heater Placement Requirements

Requirements for positioning the stove, including clearance from combustibles.

Alcove Installation Clearances

Specific clearance and dimension requirements for installing the heater in an alcove.

Straight Installation Clearances

Minimum clearances required from the heater to sidewalls and backwalls for straight installations.

Corner Installation Clearances

Minimum clearances required from the heater to cornerwalls for corner installations.

Vent System Requirements

Essential rules for installing the vent system, including rise, run, and clearance.

Gas Line Installation Procedure

Instructions for connecting the gas supply line, including shutoff valve requirements.

Finalizing the Installation Steps

Final steps including leak testing, optional equipment, and performance checks.

Reviewing the Installation

Operating Your Heater

Before You Begin Operation

Emphasizes reading the entire manual and safety precautions before operation.

Starting The Pilot Flame

Step-by-step guide for safely igniting the pilot flame, including safety wait times.

Turning the Heater On and Off

Instructions for manually or remotely controlling the main burner operation.

Maintaining Your Heater

Inspecting the Firebox

Procedures for inspecting and cleaning the firebox, burner pan, and logs for soot or damage.

Troubleshooting

Troubleshooting Table

A guide to diagnosing common problems and their potential causes and solutions.

Gas Buildup Prevention Systems

Describes safety sensors like the thermopile, spillage sensor, and pilot light that prevent gas accumulation.

Warranty Information

Listing and Technical Information

Related product manuals