11
Feed Variant, Steel/Aluminium
Only for EU countries.
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC on waste,
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached
the end of their service life must be collected separately and
returned to an environmentally compatible recycling facility.
Lorch Schweißtechnik GmbH
Postfach 1160
D-71547 Auenwald
Germany
Telephone: +49(0)7191/503-0
Fax: +49(0)7191/503-199
We herewith declare that this product was manufactured con-
form to following standards: EN 60 974-1/-10, EN 61 000-3-2,
EN 61 000-3-3, conform to the guidelines 2006/95/EG,
2004/108/EG
08
Wolfgang Grüb
Director
Lorch Schweißtechnik GmbH
Lorch Schweißtechnik GmbH
Postfach 1160
D-71547 Auenwald Germany
Tel. +49(0)7191 503-0
Fax +49(0)7191 503-199
Internet:www.lorch.biz
E-Mail:info@lorch.biz
Date of issue: 26.03.2008
Subject to change
13 Options
Table of variations Use
Roll
alu
Roll
steel
Standard Standard at 2 rolls feeding units. Suitable for steel and aluminium, depending
on wire-feed roller in use.
Standard at 4 rolls feeding units. Due to the straightening effect of the roll less
wire friction in the torch. For use with thicker or hard wires.
14 Disposal
15 Service 16 Certificate of conformity
17 Publisher
To Next Page
Loading...
Need help?
General
