Need help?Do you have a question about the LORCH MicorMIG Series and is the answer not in the manual?
General| Brand | LORCH |
|---|---|
| Model | MicorMIG Series |
| Category | Welding System |
| Language | English |
Identifies key physical components of the welding machine.
Outlines essential safety measures, regulations, and testing standards like IEC 60974-4.
Explains the inverter technology and its operational characteristics.
Details tests for gas, fans, water pump, and front panel operations.
Describes mains filter boards like NEFI02, including functions and schematics.
Details primary driver boards like DRV03/DRV13, functions, LEDs, and measuring points.
Explains secondary boards for secondary diodes like DC01.
Describes the main control logic of the MicorMIG machines.
Covers boards like DMR-RT3 for wire feed motor and communication.
Details SF27 board for water cooling unit control with flow detection.
Explains how temperature sensors monitor critical components.
Details monitoring of internal DC bus voltages and related error codes.
Describes measurement of output voltage and potential errors.
Details how welding current is measured using shunt resistors.
Explains driving and monitoring of the wire feed motor.
Covers hardware configuration saving and comparison for correct operation.
Details monitoring of input current and error codes for overcurrent.
Explains fan control and mains phase monitoring for operational status.
Details remote control and computer connection interfaces.
Covers CAN bus measurements and reading machine data via NFC/QR-code.
Lists information messages that do not block welding functions.
Provides a detailed list of error codes, causes, and remarks.
To Next Page
