Installation4
3. Use the included wall mount to mark holes for the mounting anchors (x4) and cables.
NOTE
Vertical distance between marked holes — 5.3"/135mm
Horizontal distance between marked holes — 4"/102mm
Cable hole diameter — 2”/50mm
4. Drill holes (drill bit size — 3/8”) to a depth of 2.8”/70mm in the mounting surface where
marked.
5. Insert the mounting anchors (x4) into the holes and tap them into the wall with a hammer.
#LX400116; r. 4.0/60127/60127; en-US 8
To Next Page
Loading...
