
Do you have a question about the Lorex LW2750 Series and is the answer not in the manual?
| Brand | Lorex |
|---|---|
| Model | LW2750 Series |
| Category | Security System |
| Language | English |
Essential safety guidelines for operating the product, including cleaning and ventilation.
Instructions for safe installation, including reading instructions and heeding warnings.
Guidelines for safe servicing and when to refer to qualified personnel.
Recommendations for safe usage, cleaning, and avoiding hazards like liquid entry.
Advice on planning camera placement, signal strength, and positioning.
Guidance on mounting cameras on walls or ceilings.
Instructions on positioning the receiver's antenna for optimal signal reception.
Steps for connecting power and turning on the receiver unit.
Guidance on inserting and formatting the SD card for video recording.
Details on the buttons and joystick located on the front of the receiver.
Explanation of the buttons on the top of the receiver unit.
Identifies ports and connections on the back of the receiver.
Explanation of icons and indicators shown on the receiver's display.
Instructions on how to navigate through the system's menus using the joystick.
Details on different display modes like Single Channel, Quad, and Auto Sequence.
How to use the digital zoom feature for closer viewing.
Guide to using the intercom feature for communication.
How to control the volume for two-way audio communication.
Essential step to prepare the SD card for recording.
How to set automatic recording based on time and day.
Step-by-step guide to setting up custom recording schedules.
Procedure to manually stop or automatically end scheduled recordings.
How to change or remove existing recording schedules.
How to manually start and stop recording video.
Using PIR and video motion detection to trigger recordings.
Steps to enable and configure motion-activated recording.
Adjusting the duration of recordings triggered by motion.
Configuring sensitivity and disabling video motion detection.
How resolution affects video quality and storage space.
Setting the system to overwrite old recordings when the SD card is full.
How to view recorded video files on the system.
Explanation of controls used during video playback.
Steps to remove recorded video files from the SD card.
Instructions for viewing recordings on PC or Mac via SD card.
Steps to play ASF video files on a Windows computer.
Steps to play ASF video files on an Apple Mac computer.
How to reset the system to its original factory settings.
Configuring the local time zone and daylight saving time.
Settings for network connectivity and remote access.
Configuring dynamic or static IP addresses for network setup.
Instructions for updating the system's firmware.
Requirements for using the Lorex SD Pro app on mobile devices.
Guide for connecting and using the app on iPhone and iPad.
Initial steps to connect the iOS app to the receiver.
How to view live video feeds from the system using the iOS app.
Reviewing motion-based events recorded by the system via the iOS app.
Changing or resetting the system password through the iOS app.
Adjusting the frequency of motion alerts received on the iOS device.
Configuring video quality for smooth live streaming on iOS.
How to share captured snapshots via email from the iOS app.
Guide for connecting and using the app on Android devices.
Initial steps to connect the Android app to the receiver.
How to view live video feeds from the system using the Android app.
Reviewing motion-based events recorded by the system via the Android app.
Changing or resetting the system password through the Android app.
How to view captured snapshots on the Android app.
Adjusting the frequency of motion alerts received on the Android device.
Configuring video quality for smooth live streaming on Android.
Technical details common to the system, like frequency and range.
Detailed technical information about the camera hardware.
Detailed technical information about the receiver hardware.
Guidance on ensuring an unobstructed path for wireless signal transmission.
Advice on avoiding materials and objects that degrade wireless signal strength.
Regulatory information regarding FCC standards and compliance.
Regulatory information regarding Industry Canada standards and compliance.
Warning against unauthorized modifications to the device.
Information regarding the restriction of hazardous substances in the product.