MAINTENANCE
LORTONE Tumblers are capable of operating 24 hours/day for
years with proper care.
For best operation and results follow these simple, but important
steps:
MOTOR: The motor is designed for continuous use and does
not need oiling or other maintenance. It is normal for the motor
to run hot to the touch.
CLEANING: The outside of the barrel should be kept clean.
Clean by wiping with a wet soapy cloth and rinse well with fresh
water. DO NOT put the barrel in a dishwasher or clean using
solvents. If the outside of the barrel becomes so slick that it slips
on the rollers, roughen slightly with very fi ne sandpaper or steel
wool.
BEARINGS: Oil each shaft bearing every 30 days of operation,
using one drop of lightweight lubricating oil. Do Not Use
excessive oil.
Oil shaft bearings
Oil shaft bearings
5
To Next Page
Loading...
