7
1.3 Safety information
Parts of the stove, particularly the outer surfaces, door, handles, glass panel
and flue pipe become hot during operation! Caution is advised! Appropriate
precautions must be taken (gloves are included in the scope of supply).
1.3.1 Installation instructions
The stove is assembled ready for connection and must be connected to the
existing chimney using a connecting piece. The connecting piece should be
short, straight, horizontal or slightly ascending if possible. Connections must
be sealed. Lotus stoves can be connected either from above or from the rear.
Building and fire regulations must be observed. Contact a registered installer
for advice in advance.
To Next Page
Loading...
