EasyManua.ls Logo

LoveGo G2 - Power Connection Methods; Important Safety Rules (Continued); General Electrical Safety Precautions; Danger: Electrical Shock Risk

LoveGo G2
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Let’s Go Along With Love! Let’s Go Along With Love!
Figure 6
1. Car power: Connecting the adapter (car inverter) with car cigarette lighter,
then connected with electric code.
2. Battery Power: Connecting the battery with the Adapter (car inverter),
then connected with electric cord.
3. Turn on the machine, it will work. The battery can last 61minutes after the
full charge.
4. Don’t use the battery when charging.
5. Learn more battery specification in the battery manual.
Important Safety Rules
When using electrical products, especially for children, basic safety
precautions should always be followed. Read all instructions before using.
Important information is highlighted by these terms:
DANGER
To reduce the risk of serious or fatal injury from electrical shock:
1. Do not use while bathing.
2. Do not place the product where can be splashed liquid or fall into bathtub,
water or other liquid.
3. In the event of unit falling into water, do not reach for the machine. Turn
off the home power immediately then send it to dealer or our authorized
service center for examination and repair.
WARNING
1. Check the electric rating in the unit label and wall outlet before connecting
power cord.
2. Keep all electrical cords away from heated surfaces.
3. Do not operate this unit if it:
has been dropped or knocked heavily.
has been splashed liquid.
has a damaged cord or plug.
is not working properly
WARNING
This device produces high levels of oxygen, which promotes rapid burning. Do
not allow smoking or open flames within 5 feet of this device and any oxygen
delivery accessory. Do not use oil, grease or petroleum-based products on or
near the unit. Disconnect the power cord from the electrical outlet before
you clean or repair the unit.

Related product manuals