Lowrance EAGLE 7 - User Manual

*988-13183-001*
EAGLE
®
7 & 9
Installation Guide
In the box
C
A
D
F
B
E
A EAGLE 7 or 9 display unit
B Gimbal kit
C SplitShot or TripleShot skimmer transducer
D Power cable kit
E Cable lock collars
F Documentation pack
Gimbal mounting
1
2
3
⚠ WARNING: Always wear appropriate
eyewear, ear protection, and dust mask
when drilling, cutting, or sanding. Remember
to check the reverse side of all surfaces
whenever drilling or cutting.
Recommended pilot holes
Soft/hard materials Ø 3.8 — 4.8 mm (3/16”)

Summary

In the Box

Gimbal Mounting

Gimbal Mounting Procedure

Step-by-step instructions for mounting the unit using the gimbal bracket.

Pilot Holes and Safety Precautions

Recommended pilot hole sizes and essential safety warnings for drilling.

Panel Mounting

Panel Mounting Procedure

Steps for flush mounting the display unit into a panel.

GPS Performance Warning

Caution that panel mounting might affect the unit's GPS reception.

Cable Lock Collar

Cable Lock Collar Installation

Instructions on how to attach cable lock collars for secure connections.

Wiring

Wiring Connections and Transducer Notes

Guidance on connecting power and transducer cables, referencing transducer info.

Dimensions

Technical Specifications

Accessories

Trademarks

Lowrance EAGLE 7 Specifications

General

Display Resolution	800 x 480 pixels
GPS	Yes
Waterproof Rating	IPX7
Display Size	7 inches
Sonar Type	CHIRP
Operating Voltage	12V
Transducer	Included