Need help?Do you have a question about the Lowrance Link-9 and is the answer not in the manual?
General information on RF emissions and user cautions.
Control for channel selection, menu scrolling, and data entry.
Adjusts audio volume and receiver squelch levels.
Accesses DSC calls and main menu options.
Accesses AIS mode and Hailer/Fog Horn functions.
Features for navigation and emergency MOB functions.
Procedures for initiating a distress call.
Basic radio configuration settings.
Settings related to Digital Selective Calling.
Configuration options for the AIS receiver.
Activating or deactivating the DSC feature.
Entering the Marine Mobile Service Identity.
Enabling ATIS for European inland waterways.
Entering the ATIS Identification number.
Activating or deactivating the AIS receiver.
Setting the Closest Point of Approach alarm distance.
Setting the Time to Closest Point of Approach alarm.
Customizing alert volume and screen flash for DSC calls.
Enabling or disabling CPA alarms and their components.
Explains Individual, Distress, Group, All Ships calls.
Steps for making a distress call.
Options to resend, pause, or cancel distress calls.
Making calls to predefined groups of vessels.
Making calls to all DSC-equipped vessels in range.
How to view AIS target data.
Display for approaching targets and collision risk.
Alerts for potential collision situations.
Making announcements through the hailer speaker.
Important steps and considerations before starting installation.
Details on bracket and flush mount installation methods.
Guidelines for choosing an optimal installation site.
Factors affecting the performance of the internal GPS antenna.
Step-by-step guide for installing the gimbal bracket.
Step-by-step guide for recessing the radio into a panel.
Setting the radio's operating region.
Entering the vessel's unique MMSI.
Entering ATIS ID for European inland waterways.
Choosing how the radio receives GPS data.
To Next Page
General
