Micro-nozzles and micro-heads serie 600
31
!
These functions are only possible provided the main treatment head has been selected.
Functions incorporated
in the main head
Apart from roller speed settings, frequency
or treatment mode (Roll’in or Roll’up), the
main head also incorporates the Start/
Stop and reverse functions and the roller
direction indicator.
Start/Stop:
Once the pump has been switched on via
the START button on the control screen,
starting and stopping the treatment can be
controlled from the main head:
To start treatment, squeeze the trigger
briefly.
To stop treatment, squeeze the trigger for
a longer period. This function can also be
enabled via the START/STOP button on the
head.
Direction of movement indicator (when
the rollers are moving in the same direc-
tion):
Each squeeze of the trigger reverses the
direction the head moves in.
Throughout the treatment, the direction of
movement of the main head is shown by
flashing lights.
Reverse mode and LEDs:
In reverse mode (the rollers are turning in
opposite directions) the way the LEDs flash
becomes more specific:
• in roll’out mode (the 2 rollers roll in
the fold), the 2 LEDs are lit and flash,
• in roll’in mode (the 2 rollers roll out
the fold), the 2 LEDs stay lit.
30
T7 CONVEX
T7 FLAT
T7 CONCAVE
SUPPORT (COMMON TO ALL THE MICRO-NOZZLES
AND ALL MICRO-HEADS)
MICRO-NOZZLE N°1 AND 2
TML 10 WITH REMOVABLE FLAPS
TML 19 WITH REMOVABLE FLAPS
TML 30 WITH REMOVABLE FLAPS
Adjusting the force with which the flaps
return:
To guarantee that the flaps return effectively
and therefore to optimize treatment, it is
important to adjust the knob in line with the
intensity of the treatment and the program
selected.
• Turn the knob from A to G to increase the
flap’s return force.
• Turn the knob from G to A to reduce the
flap’s return force.
Lift heads
. D
!
This chapter does not apply to Cellu M6 Keymodule i.
To Next Page
Loading...
