!
The identification rating plate is located on the bottom, behind the unit.
Identification
rating plate
Your unit is identified by a serial number
shown on the rating plate.
The rating plate also shows the permitted sup-
ply voltage for the unit.
If you need to contact LPG Systems
because of a technical problem,
please indicate the serial number of your
Cellu M6 Keymodule [2]i .
This serial number provides information
on the year and month of manufacture
of your unit.
The letter gives the year of manufacture:
V= 2005, W= 2006, X= 2007, Y= 2008, etc.
The two figures indicate the month of produc-
tion: 01= January, 02= February,
03= March, etc.
The corresponding icon indicates that the unit
was sold after August 13, 2006.
In conformity with the 2002/96/CE directive,
it cannot be thrown away with standard house-
hold waste but must be disposed of by means
of recycling.
By doing so, you help the environment by
contributing to the conservation of natural
resources and the protection of human health.
Time meters
12
Your unit comprises several TIME METERS
that total the operating hours of the various
units for periodic maintenance purposes.
These meters can be seen at control panel
level, from the CONFIGURATION screen
.
C1: The Main Head Filter Counter totals the
number of operating hours for the main
head filter.
C2: The Auxiliary Head Filter Counter totals
the number of operating hours for the
auxiliary head filter.
C3: The Pump Filter Counter totals the num-
ber of operating hours for the pump.
C4: The Main Head User Counter totals the
number of operating hours for the main
head.
C5: The Keymodule User Counter totals the
number of operating hours for the Key-
module connected to the main head.
13
This pictogram means “Warning, please con-
sult the user guide.”
This pictogram means “Your device comprises
a part that is in contact with the patient that is
isolated electrically from all other parts of the
device.”
To Next Page
Loading...
