LS Industrial Systems XGT Series Manual

XDesignerPlus Ver2.0 Communication device
1 / 41
LS Industrial Systems Co., Ltd
XGT(XGK-CPU), XGB(XBC-CPU/XBM-CPU) Series
CNET Driver
Support version
OS
V4.0 and over
XDesignerPlus
4.0.0.0 and over
CONTENTS
Thank you for using TOP series of M2I corporation.
Please read this manual carefully to know connection methods and
procedures of “TOP to External device”.
1. System configuration
Page 2
A section for showing connectable external devices, serial signal
types, connection configurations. Refer this section to select the
right system configuration.
2. Selection of TOP, External device
Page4
A section for selecting a Top model and the external device.
3. Example of system setting
Page 5
A section for explaining examples to connect communications of
TOP to External Device.
Select the correct example in your case according to “1. System
configuration”
4. Communication setting
Page 27
A section for Communication setting.
The setting should be the same with the external device.
5. Cable diagram
Page 30
A section for cable to connect to external device.
Select a suitable cable diagram for your system.
6. Usable address
Page 35
A section for usable address to communicate with external
device.

LS Industrial Systems XGT Series Specifications

General

Brand	LS Industrial Systems
Model	XGT Series
Category	Controller
Language	English