Need help?Do you have a question about the LS Industrial Systems GLOFA G7M-DT60U(N)/DC and is the answer not in the manual?
General| Brand | LS Industrial Systems |
|---|---|
| Model | GLOFA G7M-DT60U(N)/DC |
| Category | Controller |
| Language | English |
Explains symbols indicating hazards: instant death, serious injury, or property damage.
Guidelines for safe PLC module design and external circuit construction.
Precautions for safe installation environment, module handling, and connector usage.
Guidelines for safe and correct electrical wiring, including terminal screws and grounding.
Precautions for safe operation, module handling, and using peripherals.
Details electrical specifications for AC and DC power supplies.
Lists general specifications of the CPU module including operation methods and memory.
Describes error classification, operation modes, and corrective actions for system errors.
Explains the functionality of RUN, STOP, PAUSE, and DEBUG modes.
Explains specifications, performance, input requirements, and wiring examples for HSC.
Details the integrated PID control, including operations, specifications, and parameters.
Explains the 2-axis positioning function, including specifications and control methods.
Lists performance specifications for positioning, including control method and speed.
Details position control, speed control, synchronization, and operation patterns.
Describes how to set positioning parameters like acceleration, deceleration, and origin return.
Lists system flags and error codes related to positioning operations.
Explains the built-in Cnet communication function for dedicated protocol.
Describes connection methods for 1:1 and 1:N communication systems.
Explains 1:1 and 1:N built-in communication between LSIS products using RS-232C/RS-485.
Lists and explains various error codes encountered during communication.
Explains how to define, set parameters, and use custom communication protocols.
Guides through setting communication parameters for user-defined protocols.
Details Modbus protocol support, including ASCII and RTU modes.
Guides on setting Modbus communication parameters like station number and baud rate.
Explains communication without a defined protocol, including sending/receiving data.
Covers remote connection methods and usage of communication interface modules.
Explains remote connection by built-in Cnet I/F, modem, and Fnet I/F.
Details the usage of G7L-CUEB, G7L-CUEC, G7L-FUEA/RUEA, G7L-PBEA/DBEA modules.
Covers installation environment requirements and precautions during installation.
Details criteria for the installation environment, avoiding water, dust, sunlight, and vibrations.
Provides instructions for handling PLC units, modules, and terminal blocks.
Provides general wiring instructions for the PLC system, including power supply and I/O.
Details wiring instructions for power supply, including transformer usage and cable separation.
Explains wiring for input/output devices, including wire size, separation, and grounding.
Covers grounding methods for noise protection, including independent and joint grounding.
Covers periodic maintenance and inspection items for PLC modules.
Outlines daily inspection items for PLC components like LEDs and terminal connections.
Details inspection items to be checked every six months for ambient environment and PLC conditions.
Explains basic steps for troubleshooting, including visual checks and narrowing down causes.
Provides flowcharts for diagnosing issues based on LED status and device operation.
Offers a flowchart for troubleshooting when the POWER LED is turned OFF.
Provides a flowchart for troubleshooting when the ERROR LED is flashing.
Offers a flowchart for troubleshooting when the RUN LED is turned OFF.
Provides a flowchart for troubleshooting when I/O devices do not operate normally.
Offers a flowchart for troubleshooting when a program cannot be written to the CPU.
Presents examples of common circuit troubles and their corrective actions.
Details possible troubles in input circuits and their corrective actions.
Details possible troubles in output circuits and their corrective actions.
Lists and explains various error codes, their causes, and corrective actions.
To Next Page