MAINTENANCE
OM 0472SB-A [19]
LUBRICATION
Use oil or a grease gun and lubricate as follows:
DESCRIPTION INTERVAL LUBRICATION REQUIRED
Driveline
8 hours Grease each universal joint
24 hours
Separate the sliding parts and cover each one of
them with grease
Reduction Box
Every month
Check oil level. If needed, add AGMA 5EP extreme
pressure oil, SAE 80W90 gear oil or equivalent.
Once a year Replace oil
Auger
24 hours of operation or
once a year, whichever
comes first
Grease fitting on each auger section
Bearing 24 hours of operation Grease bearings on auger
Gearbox
Every month
Check oil level. If needed, add AGMA 5EP extreme
pressure oil, SAE 80W90 gear oil or equivalent.
Once a year Replace oil