5 -32
(7) Hydraulic hoses and Leakage
Stop the engine and place all the transmission
gears in neutral and lower down the implement
to the ground.
Periodically check the hydraulic system for leaks
or damaged parts - kinked, crushed, flattened,
hard blistered, heat cracked, charred, twisted,
soft or loose covered hoses and fittings.
Before removing hydraulic components, make
sure to check that the hydraulic pressure is
relieved completely. The leaks of pressurized oil
can cause a fatal physical injury.
For further information, see chapter, “3-3.
Hydraulic system” in this manual.
To Next Page
Loading...
Need help?
General
