2 -4
warning
▶DO NOT put your hand under the driver’s seat while sitting. It may cause a injury
by seat suspension.
▶DO NOT adjust the seat position while driving.
(3) Seat adjustment
Before operating the tractor, adjust the position of
driver’s seat according to body size and length.
Seat F/R adjustment lever
1) After sitting on driver’s seat, lift the seat F/R
adjustment lever up to release the lock.
2) Move the driver’s seat forward or backward
according to driver’s body length.
3) Release the seat F/R adjustment lever and
ensure that seat is locked in place.
Keep the released seat belt on the seat belt rest
after working.
To prevent the driver’s seat from weathering,
raise the driver’s seat forward.
Seat F/R
adjustment lever
(4) Seat belt
Always wear the seat belt before operating the
tractor and adjust the belt to fit the operator.
1. Insert the seat belt end into the buckle until a
“click” indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.
Check the seat belt regularly. If damaged or
frayed, replace it with a new one.
Buckle
Seat belt
Warning
▶If not wearing the seat belt, it may cause serious injury in case of an accident.
- During operation, it must be required to wear seat belt with a cab or roll-bar
installed.
- After wearing the seat belt, adjust the belt to fit your body.
▶ If the roll-bar is folded down or removed, do not wear the seat belt.
To Next Page
Loading...
Need help?
General
