Need help?Do you have a question about the LS Vision LS-BC4G116 and is the answer not in the manual?
General| Brand | LS Vision |
|---|---|
| Model | LS-BC4G116 |
| Category | Action Cameras |
| Language | English |
Read manual carefully, keep clean, ensure ventilation, avoid extreme conditions, handle with care, and back up data.
Portable devices for recording and transmitting video/audio, live tracking via GPS, used by law enforcement.
Compact, live video/audio via WiFi/3G/4G, GPS tracking, 40MP camera, IR support, panic button, indicator lights.
Visual guide to buttons like Talk Back, Record/Panic, Power, Audio Record, Snap/Flash Light, IR/Laser, USB, SIM Card.
Explanation of indicator lights: Green for power on, Red for video recording, Yellow for audio recording.
Short press to turn monitor on/off, long press to power off the device.
Short press to start/stop recording, long press for panic alarm via 3G/4G.
Short press to take pictures, long press to turn on flash light.
Short press to start/stop audio recording, device indicator turns yellow.
Short press for laser light, long press for IR recording at night.
Connects to earphone, mic, intercom; SIM for 3G/4G; USB for data and charging.
Use Menu/OK, UP, DOWN buttons for navigating menus and confirming selections.
Green light: Idle; Red light: Recording Video; Yellow light: Recording Audio.
How to turn the device on, turn the monitor on/off, and power off the device.
Start/stop video recording, device vibration and indicator status, IR for night vision.
Start/stop audio recording, device vibration and indicator status.
How to take still pictures, including during video recording.
Turning IR light on/off manually or automatically for night recording.
Accessing playback menu and navigating video, photo, and audio files.
Navigate image directories by date and time to view JPG pictures.
Navigate audio directories by date and hour to play WAV audio files.
How to enter the Setting Menu to configure device parameters.
Configuring video recording resolution, default is 1080P (1920*1080).
Setting the frames per second for video recording, options 5-30fps.
Setting recording quality (Super, High, Medium, Low) and associated bitrates.
Configuring live video transmission resolution via 3G/4G.
Setting frames per second for live video transmission via 3G/4G.
Setting live stream quality (Super, High, Medium, Low) and bitrates.
Choosing between Fluency First or Quality First for live video streaming.
Configuring resolution for taking pictures, default is 1920*1080.
Selecting USB mode: Auto, Host, or Device for data transfer.
Enabling or disabling the 3G/4G network connection.
Turning the LAN port on or off; feature reserved for future use.
Enabling or disabling the WiFi connection.
Adjusting the monitor's brightness: Auto, High, Medium, Low.
Configuring the automatic screen timeout duration.
Choosing between 'Auto' (automatic recording) or 'Manual' recording mode.
Setting IR switch mode to 'Auto' or 'Manual' for night vision.
Adjusting the microphone volume from 0 to 10, default is 8.
Adjusting the speaker volume from 0 to 10, default is 9.
Turning voice prompts for button presses on or off.
Selecting external audio input: Headphone, Interphone, or None.
Setting the duration for individual video recording files (5, 10, 20, 30 mins).
Enabling pre-recording buffer (5s, 10s, 20s) before pressing the record button.
Setting time (5s, 10s, 20s) to continue recording after stopping.
Enabling or disabling the laser light function.
Selecting the device language, default is English.
Configuring 'Setting Mode' to On/Off to manage memory card access.
Viewing device details like firmware version, SN, IP addresses, and module information.
Details on HW Ver, FW Ver, MCU Ver, Dev SN, Vendor ID, Product ID, IP addresses, WiFi MAC, etc.
Steps to connect the device to a WiFi network using the BodyCamTool.
Procedure for connecting to a network using a 3G or 4G SIM card.
Enabling USB disk mode via BodyCamTool to access device storage.
Configuring server connection details using BodyCamTool for remote access.
Technical details including LCD, OS, Image Angle, Video/Photo/Audio Format, Resolution, Night Vision, Storage.
Physical specifications: Dimension (86*62*34mm) and Weight (165g).
Battery capacity (1950mAh each) and continuous running time (6h recording).
Working temperature (-40~60°C), humidity (40%~80%), and storage temperature (-20~55°C).
Availability of log files and built-in GPS functionality.
List of items included in the package: Body Camera, Clamp, Battery, Charging stand, USB cable, Adapter, Disc.
To Next Page