LSC CIP-39900AT - User Manual

To Next Page

CIP-39900AT | Outdoor Light

with Camera

| Instruction manual

NL | Gebruiksaanwijzing

FR | Mode d’emploi

DE | Bedienungsanleitung

PL | Instrukcja obsługi

CS | Návod na použití

SK | Návod na použitie

ES | Manual de usuario

IT | Manuele utente

DK | Brugervejledning

EN Instruction manual

BOX CONTENT

• Camera

• USB power adapter and cable (use only the

adaptor provided)

• Screw pack

• Instruction manual

PARTS DESCRIPTION

1. LED light

2. Day/Night sensor

3. Microphone

4. Camera lens

5. SD card slot

6. Reset button

7. Speaker

8. Back plate

INSTALLATION

Optional: Insert a MicroSD card (not included)

• First make sure your camera is not powered.

Insert your Micro-SD card in the MicroSD card

slot on the camera. Only use a Class 10

MicroSD card (max 128GB).

• Choose a location to place your camera and

check if there is a strong Wi-fi signal.

• Tip: Complete set up on the LSC Smart

Connect app first before mounting the camera

to the wall. See the section “Download the LSC

Smart Connect app” in this manual.

• Mark the drill holes using the backplate. Also,

mark a drill hole of at least 15mm (in diameter)

to lead the camera cable inside.

• Note: Before drilling, make sure that there are

no wires or pipes located in the wall to prevent

damage.

• Drill the holes and mount the backplate to the

wall using the screws and plugs supplied.

• Connect the USB cable the camera and the

other side to the power adapter.

• Place the power adapter in a wall socket.

• Note: Use only the power adaptor provided.

GETTING STARTED

Preparation

• Note: This item only works on a 2.4GHz Wi-Fi

network, not on a 5GHz Wi-Fi network.

• One device can only be paired with one App

account at a time, if the device has already

been paired with another account, then it can’t

be paired to a new account.

• The device can be removed from the app

account by deleting it from the app.

Download the LSC Smart Connect App

• Download the LSC Smart Connect App from

the Appstore or Google Playstore or scan the

QR code.

• Open the LSC Smart Connect App, click “+” or

“Add Device”. Then select “Security” on the

“Select Device Type” page.

• Select “Smart Lighting Camera”. Power the

device on and make sure the a prompt tone is

heard.

• Input the Wi-Fi password and click on

“Confirm”. Hold the device about 20 cm from

the camera lens and scan the QR Code with

the device.

• When the device sounds “dong dong dong”,

click on “I heard the beep” in the app. You can

then complete the set-up. (About +/- 30 s.)

Light mode:

• You can turn the light on and off manually via

the app.

Night Modes:

• Smart mode: If you want the light to go on

automatically when motion is detected, select:

“Smart mode”. The light will go off 1 minute

after motion is detected. The Smart mode will

only work when it is dark and when the feature

'Motion detection' is activated.

• Infrared mode: With this mode you can see

the camera images at night, without the white

light.

• Color light mode:

The light will constantly be on when it is dark.

Resetting

• Press and hold the reset button for 5 seconds

to reset the camera. (If you have modified the

settings, they will return to factory defaults)

• One device can only be paired with one App

account at a time, if the device has already

been paired with another account, then it can’t

be paired to a new account.

• The device can be removed from the app

account by deleting it from the app.

NL Gebruiksaanwijzing

INHOUD VAN DE DOOS

• Camera

• USB-stroomadapter en -kabel (gebruik alleen

de meegeleverde adapter)

• Schroefset

• Handleiding

BESCHRIJVING VAN DE ONDERDELEN

1. Ledlamp

2. Dag/nacht-sensor

3. Microfoon

4. Cameralens

5. SD-kaartsleuf

6. Resetknop

7. Speaker

8. Achterplaat

INSTALLATIE

Optioneel: Een MicroSD-kaart plaatsen (niet

meegeleverd)

• Zorg er eerst voor dat de camera niet is

ingeschakeld. Plaats de MicroSD-kaart in de

sleuf voor MicroSD-kaarten van de camera.

Gebruik alleen Class 10 MicroSD-kaarten

(maximaal 128GB).

• Kies een locatie om uw camera te plaatsen en

controleer of er een sterk wifi-signaal is.

• Tip: Rond eerst de installatie af op de LSC

Smart Connect-app voordat u uw camera

monteert aan de muur. Zie het gedeelte

'Download de LSC Smart Connect-app' in deze

handleiding.

• Markeer de boorgaten met behulp van de

achterplaat. Markeer ook een boorgat van

minstens 15 mm (in diameter) om de

camerakabel doorheen te leiden.

• Let op: Controleer om schade te voorkomen

voordat u gaat boren of geen draden of

leidingen in de wand aanwezig zijn.

• Boor de gaten en monteer de achterplaat op de

muur met de meegeleverde schroeven en

pluggen.

• Sluit de USB-kabel aan op de camera en het

andere uiteinde op de stroomadapter.

• Steek de stekker van de stroomadapter in een

stopcontact.

• Let op: Gebruik alleen de meegeleverde

stroomadapter.

Technical data:

Wireless technology: Wi-Fi

Frequency: 2.4 GHz

Max. Radio Transmission Power: 15,59dBm

Antenna gain: 3dB

Information for power adapter:

Input: 100-240V 50/60Hz

Output: DC 5.0V 2.5A

- 900 Lumen

- 7000 Kelvin

- IP65

Only use supplied power adaptor

LSC-App

20cm

PARTS DESCRIPTION / ONDERDELENBESCHRIJVING / DESCRIPTION DES PIÈCES /

TEILEBESCHREIBUNG / OPIS CZĘŚCI / POPIS SOUČÁSTÍ / POPIS SÚČASTÍ /

DESCRIPCIÓN DE LAS PIEZAS / DESCRIZIONE DELLE PARTI / BESKRIVELSE AF DELE

(EN) NON-REPLACEABLE LIGHT SOURCE (NL) NIET-VERVANGBARE LICHTBRON

(FR) SOURCE LUMINEUSE NON REMPLAÇABLE (DE) NICHT AUSWECHSELBARES

LEUCHTMITTEL (PL) NIEWYMIENNE ŹRÓDŁO ŚWIATŁA (CS) NEVYMĚNITELNÝ SVĚTELNÝ

ZDROJ (SK) NEVYMENITEĽNÝ SVETELNÝ ZDROJ (ES) FUENTE DE LUZ NO REEMPLAZABLE

(IT) SORGENTE LUMINOSA NON SOSTITUIBILE (DK) IKKE-UDSKIFTELIG LYSKILDE

Main Page

Need help?

Do you have a question about the LSC CIP-39900AT and is the answer not in the manual?

The LSC Smart Connect Outdoor Light with Camera is a versatile smart home security device that integrates an outdoor light with a high-definition camera, offering comprehensive surveillance and illumination. This device is designed for easy installation and seamless integration into a smart home ecosystem, primarily through the LSC Smart Connect app.

Function Description

The primary function of the LSC Smart Connect Outdoor Light with Camera is to provide enhanced outdoor security through a combination of lighting and video surveillance. The device features a 1080p Full HD camera that captures clear video footage, allowing users to monitor their property in real-time. The camera is equipped with a wide-angle lens, ensuring a broad field of view.

The integrated LED light serves multiple purposes. It can be used for general illumination, enhancing visibility around the property. More importantly, the light can be triggered by motion detection, acting as a deterrent to potential intruders and providing illumination for clear video capture in low-light conditions. The device supports different light modes, including manual control, smart mode (motion-activated), and infrared mode (for discreet surveillance in complete darkness).

Two-way audio communication is a key feature, enabled by a built-in microphone and speaker. This allows users to listen in on their surroundings and speak to visitors or deter intruders remotely through the app. The device also includes a siren, which can be manually activated or set to trigger automatically upon motion detection, providing an additional layer of security.

Video footage can be stored locally on a MicroSD card (up to 128GB, not included) or accessed through cloud storage (subscription required). This ensures that important events are recorded and accessible for review. The device supports 2.4 GHz Wi-Fi connectivity, enabling remote access and control via the LSC Smart Connect app on a smartphone or tablet.

Important Technical Specifications

Resolution: 1080p Full HD for clear video capture.
Connectivity: 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n). Note: Does not support 5 GHz Wi-Fi.
Storage: MicroSD card slot, supports up to 128GB (MicroSD card not included). Cloud storage option available.
Power Supply: AC 100-240V, 50/60Hz.
Power Consumption: Max. 15.98W.
Lumen Output: 1000 lumens.
Color Temperature: 3000 Kelvin.
Beam Angle: 100 degrees.
Motion Detection: PIR sensor with adjustable sensitivity.
Audio: Two-way audio (built-in microphone and speaker).
Siren: Integrated siren.
Operating Temperature: -10°C to 40°C.
IP Rating: IP44 (splash-proof), suitable for outdoor use.
Dimensions: Approximately 20cm (height) x 7.5cm (width) x 10cm (depth).

Usage Features

Easy Setup: The device is designed for straightforward installation. Users need to download the LSC Smart Connect app, register an account, and follow the in-app instructions to pair the device. The app guides users through connecting to Wi-Fi and configuring initial settings.
Remote Access and Control: Through the LSC Smart Connect app, users can view live video streams, record footage, activate the light, trigger the siren, and engage in two-way communication from anywhere with an internet connection.
Customizable Light Modes:
- Night Modes: Users can choose from different light modes to suit their needs. "Smart mode" automatically turns on the light upon motion detection. "Infrared mode" allows for discreet surveillance in complete darkness without the light turning on. "Color light mode" keeps the light on continuously.
- Smart Mode: The light will go off 1 minute after motion stops. If motion is detected again, the light will remain on for another minute.
- Infrared Mode: This mode allows the camera to record in complete darkness using infrared illumination, without the light turning on.
- Color Light Mode: The light stays on continuously.
Motion Detection Alerts: The device sends real-time push notifications to the user's smartphone when motion is detected, allowing for immediate awareness of activity. Sensitivity levels for motion detection can be adjusted within the app.
Two-Way Audio: Users can communicate with people near the camera, which is useful for greeting visitors, giving instructions to delivery personnel, or deterring unwanted guests.
Siren Activation: The integrated siren can be manually activated via the app or configured to trigger automatically upon motion detection, providing an audible deterrent.
Video Playback and Download: Recorded footage stored on the MicroSD card or in the cloud can be reviewed and downloaded directly from the app.
Multi-User Access: The device can be shared with multiple family members or trusted individuals, allowing them to also monitor and control the security light via their own LSC Smart Connect accounts.
Integration with Smart Home Ecosystems: The LSC Smart Connect ecosystem allows for potential integration with other smart devices, enhancing overall home automation and security.

Maintenance Features

Firmware Updates: The device supports over-the-air (OTA) firmware updates, ensuring that it always has the latest features, security patches, and performance improvements. Users will be notified through the app when an update is available.
Reset Functionality: A reset button is provided on the device. Holding this button for 5 seconds will restore the device to factory settings, which can be useful for troubleshooting or re-pairing the device. Note that resetting the device will require re-pairing it with the app.
MicroSD Card Management: Users can manage their MicroSD card directly through the app, including formatting the card or reviewing stored footage. Regular formatting is recommended to maintain optimal performance and prevent data corruption.
Cloud Storage Option: For users who prefer not to manage local storage, a cloud storage subscription offers a convenient and secure way to store video recordings, eliminating the need for physical MicroSD card maintenance.
Cleaning: The device's exterior can be cleaned with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or electronic components. Ensure the device is powered off before cleaning.
Wi-Fi Connectivity Monitoring: The LSC Smart Connect app provides status updates on the device's Wi-Fi connection, allowing users to quickly identify and troubleshoot any connectivity issues. A stable Wi-Fi connection is crucial for optimal performance and remote access.
Account Management: The app allows users to manage their LSC Smart Connect account, including password changes and device sharing settings, ensuring secure access to their security system.