To Next PageTo Next Page
Need help?Do you have a question about the LSC maXim and is the answer not in the manual?
How to perform system and total resets for the maxim.
Guide to creating looks, presetting, and crossfading between looks.
Step-by-step instructions for recording a lighting scene.
Instructions for recording a chase sequence.
Guide on how to record a stack of steps.
Detailed guide on how to record scenes, including fade times.
How to replay recorded scenes on different playback banks.
Instructions for modifying existing scenes' channel levels and fade times.
Step-by-step guide to recording chases and their steps.
How to replay recorded chases on different playback banks.
Instructions for modifying chases, including adding/removing steps.
Using the Grab master to maintain current output as a snapshot.
Using the Grab master to act as a playback for recorded scenes.
Detailed instructions for recording stacks and their steps.
Instructions for modifying stacks, including steps and times.
Procedures for performing system and total resets.
General| Type | Moving Head |
|---|---|
| Pan Range | 540° |
| Tilt Range | 270° |
| DMX Channels | 16 |
| Submasters | Unknown |
| Light Source | LED |
| Control | DMX512, RDM |
