LSC maXim - Grab as a Chase Master; Grab as a Memory

maXim Operator Manual Grab Master
LSC Lighting Systems (Aust) Pty. Ltd. Page 39 of 66
10.4 GRAB AS A CHASE MASTER
Any existing Chase from any Page may be copied to the Grab master, or a chase may be recorded
directly into the Grab master. The Grab master then performs like any other Playback containing a
chase. See the “CHASES” chapter for details on how to control the chase.
COPYING A CHASE TO THE GRAB MASTER
To copy a chase from any page of memory, to the Grab master, press;
[assign/copy]
The display reads “Pick memory to copy from”.
If the source is not in the current red page, use the red page button to select the source page
number then press [F/A] (chase number). The display will briefly scroll,
“Pick location to copy to”.
Press [F/A] (grab)
The display confirm the copy.
RECORDING A CHASE ON THE GRAB MASTER
This is the same procedure as recording a chase on a Playback except that the Grabmaster is
selected as the chase number. The Chase in the Grab master may be controlled and edited in
exactly the same manner as a chase in a Playback . Refer to the “CHASE” chapter for details
10.5 GRAB AS A MEMORY
COPYING A STACK TO THE GRAB MASTER
Any existing stack from any Page may be copied to the Grab master. The Grab master cannot
replay the stack but does provide a handy storage location for a stack.
To copy a stack from any page of memory, to the Grab master, press;
[assign/copy]
The display reads “Pick memory to copy from”.
If the source is not in the current red page, use the red page button to select the source page
number then press [F/A] (stack number). The display will briefly scroll,
“Pick location to copy to”.
Press [F/A] (grab).
The display confirms the copy.
COPYING FROM THE GRAB MASTER
A grab (snapshot), a scene, a chase or a stack in the grab master can be copied to any
page/number memory. Press:
[assign/copy]
[F/A] (grab)
The display reads “Pick location to copy to”.
If the destination is not in the current red page, use the red page button to select the destination
page number then press [F/A] (memory number). The display confirm the copy.
.
A stack in the grab master can be also copied to the stack master. Press:
[assign/copy]
[F/A] (grab)
[stack flash]